Fuction
This flasher is connected to the car high beam wires, it controls the left and right high beam alternate flash quickly, to alert front cars and pedestrians.
Usage
Whether day or night, turn on the control switch, car high beam will alternate flash ( flash speed is adjustable ), turn off the switch, high beam used normally.
Install Method
1, Cut the car high beam switch's wire, then connect to the flasher input wire.
2, Connect the flasher's output wire to the cut wire end of the car high beam.
3, Connect the flasher's power wire and switch.
Notice
The flasher can only be used on halogen or led headlight. (No xenon headligh) The fuse must be connected to protect the flasher.
Work voltage |
DC9-16V |
Power |
150W + 150W (MAX) |
Work temperature |
-30ºC - 50ºC |